280T All-Rounder Middle Trunk Line Fusion Splicer
Category: Fusion Splicer
Core features
● 4 Motor mainline fusion splicer
● Fiber core alignment, Fiber core visible
● Auto splice & auto heat function
● Fully ruggedized for shock, dust, and moisture
●3-Year extended warranty
● 4.3-Inch capacitive touch screen
● Tool-less electrodes replacement
Description
Features
280T All-Rounder Middle Trunk Line Fusion Splicer
● 4 Motor mainline fusion splicer
● Auto splice & auto heat function
● 4 Motor mainline fusion splicer
● Auto splice & auto heat function
Auto splice & auto heat function
● Fast-splicing 8s
● Fast-heating 18s
● Fiber core visible
● Fast-heating 18s
● Fiber core visible
4.3-Inch capacitive touch screen
● 4.3-Inch capacitive touch screen
Multi-scenario application
● 60KM metropolitan area network
● FTTx Fiber to the home
● Security monitoring
● Installation and maintenance construction
● 60KM metropolitan area network
● FTTx Fiber to the home
● Security monitoring
● Installation and maintenance construction
2 layer cooling tanks arrying upgrade
● 2 layer cooling tanks arrying upgrade
● Twice as much capacity as usual
● Twice as much capacity as usual
Support the placement of cleaver operating platform
● Support the placement of cleaver operating platform do cleaving and splicing work in one step(The console needs to be bought separately)
Tool-less electrodes replacement
● Electrode life around 5000 times(Replaceable)
Exquisite detailHigh quality
● Adapt to various environments, fully ruggedized for shock, water and dust
● Waterproof body
● Shock and fall proof
● Dirt and dust resistance
● Waterproof body
● Shock and fall proof
● Dirt and dust resistance
● bare fiber
Full body silicone sheathcomprehensive protection
● Full body silicone sheathcomprehensive protection
3-IN-1 Fiber Holder
● Fiber holder suitable for Bare Fiber
● 3.0mm, Jump Fiber
● Pigtail and Fiber
● Rubber-insulated fiber cable
● Fiber holder suitable for Bare Fiber
● 3.0mm, Jump Fiber
● Pigtail and Fiber
● Rubber-insulated fiber cable
Specification
Alignment method | Core Alignment |
Applicable fiber type | SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
Compatible Fiber/Cable | 0.25~3.0 mm / Rubber-insulated fiber cable |
Fiber Holder | Replaceable universal fiber holder |
Fiber Diameter | Cladding:80-150µm, Coating: 100-1000µm |
Fiber Cleave Length | 8-16 mm |
Splicing mode | Max 128 modes |
Typical Splice Loss | SM: 0.02dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.02dB ★① |
Return Loss | >>60dB |
Splicing Time | SM Quick mode: 8 sec/ SM Average: 15 sec |
Estimated Splice Loss | Available |
Heating Time | Quick mode 18 sec.(SM G652 250µm 40mm Sleeve) adjustable★② |
Protection Sleeve Length | 20mm, 30mm, 40mm, 50mm, 60mm |
Heat Programs | Max 32 modes |
Battery | 6800mAh Battery Capacity, Typical 300 Cycles (Splice&Heat) per Charge ★③ |
Electrode Life | 5000 arcs, can be extended by using an electrode grinder ★④ |
Auto-start | Splice / Heating |
Automatic Fiber Identification | / |
Automatic ARC Identification | Automatic arc calibration by air pressure and temperature |
Results Storage | The last 10,000 splice records and 2,000 result images |
Tension Test | 1.96~2.25N |
Operating Condition | Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s |
Storage Condition | 0~95% relative humidity, -20~60°C |
Display | 4.3-Inch capacitive touch screen |
Fiber Magnification | X, Y, XY, X/Y : 320X Magnification |
Power Supply | AC Input 100-240V, DC Input 9-14V |
Terminal | USB2.0 |
Weigh | 1.6kg without battery / 1.9kg with battery |
Size | 143H x 136W x 155D mm (including rubber bumper) |
Download
Product manual PDF
Tutorials
Products Tutorials
Configration
Product configuration
280T
operating platform
Two layer cooling tanks
Packing list
Category: Fusion Splicer
Core features
● 5″ 800×480 HD screen
● Suitable for SM/MM/DS/NZDS/BIF single core fiber
● 3-in-1 fiber holder
● X, Y, XY, X/Y : 320X Magnification
● Average splicing loss: 0.01dB
● Compact, light weight & faster
● Fast-splicing 6s, fast-heating 16s
● Electrodes life: 5000 times
● The last 10,000 splice records and 2,000 result images
● 5200mAh battery capacity, 300 times splice & heat cycles
● 5″ 800×480 HD screen
● Suitable for SM/MM/DS/NZDS/BIF single core fiber
● 3-in-1 fiber holder
● X, Y, XY, X/Y : 320X Magnification
● Average splicing loss: 0.01dB
● Compact, light weight & faster
● Fast-splicing 6s, fast-heating 16s
● Electrodes life: 5000 times
● The last 10,000 splice records and 2,000 result images
● 5200mAh battery capacity, 300 times splice & heat cycles
KL-360T Backbone Optical Fusion Splicer
Description
Features
Waterproof and dustproof
● Full body rubber sheath
● Adapt to various environments, anti-drop, waterproof, dustproof
● Full body rubber sheath
● Adapt to various environments, anti-drop, waterproof, dustproof
Fast heating, fast welding
Fully automatic welding heating
● 6S welding, let you work one step faster
● 16s heating, sustainable 215° heating
● 16s heating, sustainable 215° heating
Three in one fixture
● Three-in-one multi-functional universal clamp
● The clamp is compatible with various types of optical fibers, saving time and effort in operation
● The clamp is compatible with various types of optical fibers, saving time and effort in operation
Core Alignment
● Core alignment--5.0” inch high-definition LCD display
● Provide users with a large and clear optical fiber
● Core display image, splice loss, core alignment, at a glance
● Provide users with a large and clear optical fiber
● Core display image, splice loss, core alignment, at a glance
double layer cooling tank
● Double-layer cooling tank--2 times more carrying capacity than conventional
Specification
Splice Method | Core Alignment |
Applicable Fibers | SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
Compatible Fiber/Cable | 0.25~3.0 mm / indoor cable |
Fiber Holder | Replaceable (Universal: FH-60, SOC Holder: FH-SOC(optional)) |
Fiber Diameter | Cladding: 80-150μm,Coating: 100~1000μm |
Fiber Cleave Length | 8~16 mm |
Splice mode | Max 128 modes |
Typical Splice Loss | SM: 0.02dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.02dB ★① |
Return Loss | >>60dB |
Splicing Time | SM Quick mode : 6 sec / SM Average: 16 Sec. |
Estimated Splice Loss | Available |
Heating Time | Quick mode 16 sec.(SM G652 250μm 40mm Sleeve) adjustable |
Protection Sleeve Length | 20mm, 30mm, 40mm, 50mm, 60mm |
Heat Programs | Max 32 modes |
Battery | 5200mAh Battery Capacity, Typical 300 Cycles (Splice&Heat) per Charge ★② |
Electrode Life | 5000 arcs, can be extended by using an electrode grinder ★③ |
Auto-start | Splice / Heating |
Automatic Fiber Identification | SMF / MMF / other |
Automatic ARC Identification | Automatic arc calibration by air pressure and temperature |
Results Storage | The last 10,000 splice records and 2,000 result images |
Tension Test | 1.96~2.25N |
Operating Condition | Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s |
Storage Condition | 0~95% relative humidity, -20~60°C |
Display | 5.0” color high resolution (800 x 480) display |
Fiber Magnification | X, Y, XY, X/Y : 320X Magnification |
Power Supply | AC Input 100-240V, DC Input 9-14V |
Terminal | USB2.0 |
Weight | 1.6kg without battery / 1.9kg with battery |
Size | 138H x 160W x 150D mm (including rubber bumper) |
★① With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.
★② Splice & Heat cycles may vary depending on the battery status and the operating environment.
★③ Electrode life may vary depending on the operating environment.
Download
Product manual PDF
Tutorials
Products Tutorials
Configration
Product configuration
Fusion splicer
all equipped
280E All-Rounder Middle Trunk Line Fusion Splicer
Category: Fusion Splicer
Core features
● 4 Motor mainline fusion splicer
● Fiber core alignment, Fiber core visible
● Auto splice & auto heat function
● Fully ruggedized for shock, dust, and moisture
● 6800mAh High capacity battery with 300 splices&shrinks per charge
●3-Year extended warranty
● Tool-less electrodes replacement
Description
Features
Waterproof and dustproof
● Full body rubber sheath
● Adapt to various environments, anti-drop, waterproof, dustproof
● Full body rubber sheath
● Adapt to various environments, anti-drop, waterproof, dustproof
Fast heating, fast welding
Fully automatic welding heating
● 6S welding, let you work one step faster
● 16s heating, sustainable 215° heating
● 16s heating, sustainable 215° heating
Three in one fixture
● Three-in-one multi-functional universal clamp
● The clamp is compatible with various types of optical fibers, saving time and effort in operation
● The clamp is compatible with various types of optical fibers, saving time and effort in operation
Core Alignment
● Core alignment--5.0” inch high-definition LCD display
● Provide users with a large and clear optical fiber
● Core display image, splice loss, core alignment, at a glance
● Provide users with a large and clear optical fiber
● Core display image, splice loss, core alignment, at a glance
double layer cooling tank
● Double-layer cooling tank--2 times more carrying capacity than conventional
Specification
Splice Method | Core Alignment |
Applicable Fibers | SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
Compatible Fiber/Cable | 0.25~3.0 mm / indoor cable |
Fiber Holder | Replaceable (Universal: FH-60, SOC Holder: FH-SOC(optional)) |
Fiber Diameter | Cladding: 80-150μm,Coating: 100~1000μm |
Fiber Cleave Length | 8~16 mm |
Splice mode | Max 128 modes |
Typical Splice Loss | SM: 0.02dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.02dB ★① |
Return Loss | >>60dB |
Splicing Time | SM Quick mode : 6 sec / SM Average: 16 Sec. |
Estimated Splice Loss | Available |
Heating Time | Quick mode 16 sec.(SM G652 250μm 40mm Sleeve) adjustable |
Protection Sleeve Length | 20mm, 30mm, 40mm, 50mm, 60mm |
Heat Programs | Max 32 modes |
Battery | 5200mAh Battery Capacity, Typical 300 Cycles (Splice&Heat) per Charge ★② |
Electrode Life | 5000 arcs, can be extended by using an electrode grinder ★③ |
Auto-start | Splice / Heating |
Automatic Fiber Identification | SMF / MMF / other |
Automatic ARC Identification | Automatic arc calibration by air pressure and temperature |
Results Storage | The last 10,000 splice records and 2,000 result images |
Tension Test | 1.96~2.25N |
Operating Condition | Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s |
Storage Condition | 0~95% relative humidity, -20~60°C |
Display | 5.0” color high resolution (800 x 480) display |
Fiber Magnification | X, Y, XY, X/Y : 320X Magnification |
Power Supply | AC Input 100-240V, DC Input 9-14V |
Terminal | USB2.0 |
Weight | 1.6kg without battery / 1.9kg with battery |
Size | 138H x 160W x 150D mm (including rubber bumper) |
★① With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.
★② Splice & Heat cycles may vary depending on the battery status and the operating environment.
★③ Electrode life may vary depending on the operating environment.
Download
Product manual PDF
Tutorials
Products Tutorials
Configration
Product configuration
Fusion spliceroperating platform