280T All-Rounder Middle Trunk Line Fusion Splicer
Category: Fusion Splicer
Core features
● 4 Motor mainline fusion splicer
● Fiber core alignment, Fiber core visible
● Auto splice & auto heat function
● Fully ruggedized for shock, dust, and moisture
●3-Year extended warranty
● 4.3-Inch capacitive touch screen
● Tool-less electrodes replacement
Product configuration
280T
operating platform
Two layer cooling tanks
Packing list
Products Tutorials
Product manual PDF
| Alignment method | Core Alignment |
| Applicable fiber type | SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
| Compatible Fiber/Cable | 0.25~3.0 mm / Rubber-insulated fiber cable |
| Fiber Holder | Replaceable universal fiber holder |
| Fiber Diameter | Cladding:80-150µm, Coating: 100-1000µm |
| Fiber Cleave Length | 8-16 mm |
| Splicing mode | Max 128 modes |
| Typical Splice Loss | SM: 0.02dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.02dB ★① |
| Return Loss | >>60dB |
| Splicing Time | SM Quick mode: 8 sec/ SM Average: 15 sec |
| Estimated Splice Loss | Available |
| Heating Time | Quick mode 18 sec.(SM G652 250µm 40mm Sleeve) adjustable★② |
| Protection Sleeve Length | 20mm, 30mm, 40mm, 50mm, 60mm |
| Heat Programs | Max 32 modes |
| Battery | 6800mAh Battery Capacity, Typical 300 Cycles (Splice&Heat) per Charge ★③ |
| Electrode Life | 5000 arcs, can be extended by using an electrode grinder ★④ |
| Auto-start | Splice / Heating |
| Automatic Fiber Identification | / |
| Automatic ARC Identification | Automatic arc calibration by air pressure and temperature |
| Results Storage | The last 10,000 splice records and 2,000 result images |
| Tension Test | 1.96~2.25N |
| Operating Condition | Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s |
| Storage Condition | 0~95% relative humidity, -20~60°C |
| Display | 4.3-Inch capacitive touch screen |
| Fiber Magnification | X, Y, XY, X/Y : 320X Magnification |
| Power Supply | AC Input 100-240V, DC Input 9-14V |
| Terminal | USB2.0 |
| Weigh | 1.6kg without battery / 1.9kg with battery |
| Size | 143H x 136W x 155D mm (including rubber bumper) |
Features
280T All-Rounder Middle Trunk Line Fusion Splicer
● 4 Motor mainline fusion splicer
● Auto splice & auto heat function
● 4 Motor mainline fusion splicer
● Auto splice & auto heat function
Auto splice & auto heat function
● Fast-splicing 8s
● Fast-heating 18s
● Fiber core visible
● Fast-heating 18s
● Fiber core visible
4.3-Inch capacitive touch screen
● 4.3-Inch capacitive touch screen
Multi-scenario application
● 60KM metropolitan area network
● FTTx Fiber to the home
● Security monitoring
● Installation and maintenance construction
● 60KM metropolitan area network
● FTTx Fiber to the home
● Security monitoring
● Installation and maintenance construction
2 layer cooling tanks arrying upgrade
● 2 layer cooling tanks arrying upgrade
● Twice as much capacity as usual
● Twice as much capacity as usual
Support the placement of cleaver operating platform
● Support the placement of cleaver operating platform do cleaving and splicing work in one step(The console needs to be bought separately)
Tool-less electrodes replacement
● Electrode life around 5000 times(Replaceable)
Exquisite detailHigh quality
● Adapt to various environments, fully ruggedized for shock, water and dust
● Waterproof body
● Shock and fall proof
● Dirt and dust resistance
● Waterproof body
● Shock and fall proof
● Dirt and dust resistance
● bare fiber
Full body silicone sheathcomprehensive protection
● Full body silicone sheathcomprehensive protection
3-IN-1 Fiber Holder
● Fiber holder suitable for Bare Fiber
● 3.0mm, Jump Fiber
● Pigtail and Fiber
● Rubber-insulated fiber cable
● Fiber holder suitable for Bare Fiber
● 3.0mm, Jump Fiber
● Pigtail and Fiber
● Rubber-insulated fiber cable
Category: Fusion Splicer
Core features
● 5″ 800×480 HD screen
● Suitable for SM/MM/DS/NZDS/BIF single core fiber
● 3-in-1 fiber holder
● X, Y, XY, X/Y : 320X Magnification
● Average splicing loss: 0.01dB
● Compact, light weight & faster
● Fast-splicing 6s, fast-heating 16s
● Electrodes life: 5000 times
● The last 10,000 splice records and 2,000 result images
● 5200mAh battery capacity, 300 times splice & heat cycles
● 5″ 800×480 HD screen
● Suitable for SM/MM/DS/NZDS/BIF single core fiber
● 3-in-1 fiber holder
● X, Y, XY, X/Y : 320X Magnification
● Average splicing loss: 0.01dB
● Compact, light weight & faster
● Fast-splicing 6s, fast-heating 16s
● Electrodes life: 5000 times
● The last 10,000 splice records and 2,000 result images
● 5200mAh battery capacity, 300 times splice & heat cycles
KL-360T Backbone Optical Fusion Splicer
Product configuration
Fusion splicer
all equipped
Products Tutorials
Product manual PDF
| Splice Method | Core Alignment |
| Applicable Fibers | SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
| Compatible Fiber/Cable | 0.25~3.0 mm / indoor cable |
| Fiber Holder | Replaceable (Universal: FH-60, SOC Holder: FH-SOC(optional)) |
| Fiber Diameter | Cladding: 80-150μm，Coating: 100~1000μm |
| Fiber Cleave Length | 8~16 mm |
| Splice mode | Max 128 modes |
| Typical Splice Loss | SM: 0.02dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.02dB ★① |
| Return Loss | >>60dB |
| Splicing Time | SM Quick mode : 6 sec / SM Average: 16 Sec. |
| Estimated Splice Loss | Available |
| Heating Time | Quick mode 16 sec.(SM G652 250μm 40mm Sleeve) adjustable |
| Protection Sleeve Length | 20mm, 30mm, 40mm, 50mm, 60mm |
| Heat Programs | Max 32 modes |
| Battery | 5200mAh Battery Capacity, Typical 300 Cycles (Splice&Heat) per Charge ★② |
| Electrode Life | 5000 arcs, can be extended by using an electrode grinder ★③ |
| Auto-start | Splice / Heating |
| Automatic Fiber Identification | SMF / MMF / other |
| Automatic ARC Identification | Automatic arc calibration by air pressure and temperature |
| Results Storage | The last 10,000 splice records and 2,000 result images |
| Tension Test | 1.96~2.25N |
| Operating Condition | Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s |
| Storage Condition | 0~95% relative humidity, -20~60°C |
| Display | 5.0” color high resolution (800 x 480) display |
| Fiber Magnification | X, Y, XY, X/Y : 320X Magnification |
| Power Supply | AC Input 100-240V, DC Input 9-14V |
| Terminal | USB2.0 |
| Weight | 1.6kg without battery / 1.9kg with battery |
| Size | 138H x 160W x 150D mm (including rubber bumper) |
★① With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.
★② Splice & Heat cycles may vary depending on the battery status and the operating environment.
★③ Electrode life may vary depending on the operating environment.
Features
Waterproof and dustproof
● Full body rubber sheath
● Adapt to various environments, anti-drop, waterproof, dustproof
● Full body rubber sheath
● Adapt to various environments, anti-drop, waterproof, dustproof
Fast heating, fast welding
Fully automatic welding heating
● 6S welding, let you work one step faster
● 16s heating, sustainable 215° heating
● 16s heating, sustainable 215° heating
Three in one fixture
● Three-in-one multi-functional universal clamp
● The clamp is compatible with various types of optical fibers, saving time and effort in operation
● The clamp is compatible with various types of optical fibers, saving time and effort in operation
Core Alignment
● Core alignment--5.0” inch high-definition LCD display
● Provide users with a large and clear optical fiber
● Core display image, splice loss, core alignment, at a glance
● Provide users with a large and clear optical fiber
● Core display image, splice loss, core alignment, at a glance
double layer cooling tank
● Double-layer cooling tank--2 times more carrying capacity than conventional
KL-530 Core Alignment Fusion Splicer
Product configuration
Fusion splicer
operating platform
Products Tutorials
Product manual PDF
| Splice Method : | Active Clad-Alignment |
| Applicable Fibers : | SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
| Compatible Fiber/Cable : | 0.25~3.0 mm / indoor cable |
| Fiber Holder : | Replaceable (Universal: FH-60, SOC Holder: FH-SOC(optional)) |
| Fiber Diameter : | Cladding: 80-150μm,Coating: 100~1000μm |
| Fiber Cleave Length : | 8~16 mm |
| Splice mode : | Max 128 modes |
| Typical Splice Loss : | SM: 0.03dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.03dB ★① |
| Return Loss : | >>60dB |
| Splicing Time : | SM Quick mode : 8 sec / SM Average: 10 Sec |
| Estimated Splice Loss : | Available |
| Heating Time : | Quick mode 18 sec.(SM G652 250μm 40mm Sleeve) adjustable |
| Protection Sleeve Length | 20mm, 30mm, 40mm, 50mm, 60mm |
| Heat Programs: | Max 32 modes |
| Battery | 5200mAh Battery Capacity, Typical 300 Cycles (Splice&Heat) per Charge ★② |
| Electrode Life | 5000 arcs, can be extended by using an electrode grinder ★③ |
| Auto-start : | Splice / Heating |
| Automatic Fiber Identification | / |
| Automatic ARC Identification | Automatic arc calibration by air pressure and temperature |
| Results Storage : | The last 10,000 splice records and 2,000 result images |
| Tension Test | 1.96~2.25N |
| Operating Condition | Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s |
| Storage Condition | 0~95% relative humidity, -20~60°C |
| Display | 4.3” color high resolution (800 x 480) display |
| Fiber Magnification | X, Y, XY, X/Y : 320X Magnification |
| Power Supply : | AC 100-240V, DC 9-14V |
| Terminal | USB2.0 |
| Weight | 1.6kg without battery / 1.9kg with battery |
| Size | 139H x 163W x 140D mm (including rubber bumper) |
★① With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.
★② Splice & Heat cycles may vary depending on the battery status and the operating environment.
★③ Electrode life may vary depending on the operating environment.
Features
Trunk fiber optic fusion splicer
● Cladding alignment
● Robust three-proof design
● Three-year warranty
● Robust three-proof design
● Three-year warranty
Application Scenario
● 60KM trunk line metropolitan area network
● FTTx optical fiber to the home
● Security monitoring
● Installation and maintenance project
● FTTx optical fiber to the home
● Security monitoring
● Installation and maintenance project
Expansibility - cutting knife console
● Applicable to a variety of cutting knives
● Cooling tank can be placed
● Highly scalable (this operating table needs to be purchased separately)
● Cooling tank can be placed
● Highly scalable (this operating table needs to be purchased separately)
Tool-free installation of electrode rods
● The life of the electrode is about 5000 times
● The electrode rod can be easily disassembled without tools
● When the welding times are too high and the loss is too large, please replace the electrode rod as soon as possible
● The electrode rod can be easily disassembled without tools
● When the welding times are too high and the loss is too large, please replace the electrode rod as soon as possible
8s automatic welding
● 8s welding, work one step faster
● Cladding alignment
● Typical value (SM G652 Quick mode)
(Affected by battery usage status and operating environment)
● Cladding alignment
● Typical value (SM G652 Quick mode)
(Affected by battery usage status and operating environment)
18s automatic heating
● Heating time can be adjusted
● SM G652 250μm 40mm heat shrink tube in fast mode (affected by battery usage status and operating environment)
● Sustainable heating at 215°, the lid is automatically heated
● SM G652 250μm 40mm heat shrink tube in fast mode (affected by battery usage status and operating environment)
● Sustainable heating at 215°, the lid is automatically heated
3 in 1 Universal Fixture
● jumper line
● pigtail
● leather line
● bare fiber
● pigtail
● leather line
● bare fiber
LCD display
● 4.3-inch LCD high-definition display
● Splice loss, clear at a glance
● Splice loss, clear at a glance
Solid three-proof design
● Adapt to welding + heating in various environments
● Waterproof, dustproof and dropproof
● Waterproof, dustproof and dropproof